apple watch stuck on apple logo after screen replacement

Be patient and try the following common workarounds that could help you fix the issue. Once you tap on Play Sound after 20 seconds your Apple watch would ring and the logo stuck on the screen would disappear.

Apple Watch Stuck On The Apple Logo Here S The Fix

Click where it says Software Update.

. Apple Watch stuck on the Apple Logo. Open the Watch app and tap on the My Watch tab. Apple Watch Series 3Apple Watch Series 4Apple Watch Series 5Apple Watch Series 6Apple Watch SE.

Make sure that the progress bar on your iPhone screen hasnt moved for at least one hour. Apple watch stuck on logo after hard reset. After hard reseting your Apple Watch you may have to wait a few minutes before it turns back on.

Leave the Apple Watch alone about 1 min. Release when the screen goes off. You will find Apple logo.

I did a screen replacement in the AW Series 1 and it got stuck on the Apple Logo. It has disappeared from the app on my phone and I cannot repair since it wont turn on. This will turn off the watch.

So if your Apple Watch stuck on Apple logo then you can use the following method to fix it. How to solve Apple Watch stuck on the Apple logo startup screen or progress circle 1. Find the Reset option and select it.

Press and hold the Digital Crown and Side button simultaneously. At times this little trick of using the Find My feature can unfreeze a stuck. If still unresolved repeat the process multiple times.

Press and release the Volume Down button. After a while it will say that it didnt unpair properly and you will have to erase from the watch itself. In between that time I can feel the watchs Haptic Engine go one time then the Apple Logo goes away.

Tap the information button look for the i in a circle then tap Find My Apple Watch. Force Restart is a step above resetting your Watch by turning it off and on again. Scroll down and click the General option.

Click the Erase Apple Watch Content and Settings. Perform a Hard Reset When Apple Watch Stuck on Logo. The Apple Watch will not power on or if it does power on then you will get a screen with an Apple Logo and in some instances a red exclamation mark shows up on the screen.

Force restart the Watch. My apple watch is stuck on the apple logo I attempted a hard reset several times. Ignore that warning and wait a few minutes and you should see the ring going around the apple logo.

Use Find My Apple Watch to unfreeze it. Then go to My Watch on your phone followed by General. If you are trying to update the watch make sure it has enough storage Watch app on iPhone General.

No worries if your Apple Watch is stuck on the Apple logo screen. Upgrading to the latest iOS operating system might get rid of the logo and get the Apple Watch working again. To force restart your watch long press the digital crown and side button simultaneously till the Apple logo appears on the screen.

Press and hold the side button and the digital crown on your Apple Watch when the Watch shows the Apple logo. I done a hard reset and again no changes. Up to 30 cash back Another way to resolve the stuck in Apple logo problem is to consider Force Restarting the Apple Watch.

It will stay on the Apple Logo for about 30 seconds - 1 minute. To unpair your watch from your iPhone to fix the Apple Watch stuck on the Apple logo problem do the following steps. Then tap on the name of your Apple Watch at the top of this menu.

It is still stuck on the logo. Change Apple watch Setting Turn off Screen Curtain and Voice over mode Some internal settings might be arising issue your watch turns on normally but you dont know your watch goes into Curtain mode and Behavioural Screen not responding to touch Disable that mode. Phone stuck on apple logo after screen replacement.

Keep holding the Side button until you see the recovery mode screen. Hello everyone Okay i replaced a iphone 6 phone screen yesterday and since the replacement when i boot the device it is stuck on the boot screen. One click of the power button the Apple Logo returns dont need to hold the power button just one click literally and it repeats.

To restart it press the side button and drag the power off slider to the right. Press and release the Volume Up button. You should first be sure that your iPhone is paired with the watch.

Update iOS if Your Apple Watch is Stuck on the Logo. Posted by 11 hours ago. If the hard reset fixed your Apple Watch thats great.

Once the ring closes youll have a reset apple watch and all you have to do is repair. If your iPhone is stuck on the Apple logo. IPhone 8 and later.

This is the simplest essential thing you must do when your Apple Watch is stuck. Restart your Apple Watch. You may have to hold both buttons for 15-30 seconds before the Apple logo appears.

However its important for you to know that a hard reset is almost always a temporary fix. Apple watch 4 stuck on the apple logo after screen glass replacement stays on the logo for a bit and then boot loops. Continue holding both buttons until the Apple logo appears then let go.

Apple watch 4 stuck on the apple logo after screen glass replacement stays on the logo for a bit and then boot loops. Many users have reportedly fixed the issue after 2-3 rebooting. Watch Video on Apple Watch Stuck on Apple Logo WatchOS 8 Step 2.

Simply press and hold both the side buttons and the Digital Crown simultaneously for a few seconds. In this video tutorial I will show you how to fix your Apple Watch if is stuck on the Apple logoThis solution was tested by me and worked from the second at. Open your iPhone and find Watch then tap on your Apple Watch that is stuck on the iPhone logo.

5 Ways fix it. After tapping Find My Apple Watch youll be prompted to log into Find My iPhone using your Apple ID. Up to 50 cash back Way 1.

Go to the watch app go to your watch and select unpair. When your Apple watch gets stuck on. If your smartwatch restarts normally you have got rid of the issue.

If the problem still persists even after the restart try doing the same for at least 2 more times. Force Restart Your Apple Watch to Fix Apple Logo Stuck Find side button and digital crown on Apple Watch Press and Hold on the side button and digital crown at the same time at least 15 seconds until Apple logo disappear and. When your Apple Watch got stuck on the Apple logo its mostly due to software crash while turning on and your watch freezes.

Wait for your watch to respond to the command and play. I let the phone run out of battery plugged it in and it was stuck on the charge icon. Open the Watch app on your phone.

Then click the i icon behind the name of your Apple Watch and tap on Find my Apple Watch. Press and hold the Side button.

Apple Watch Stuck On The Apple Logo Here S The Fix